Evaluating Flow Characteristics of Ground and Cut Biomass for Industrial Applications

Abstract

In recent years, biomass utilization has significantly increased, presenting challenges in its incorporation into various systems. Effective handling requires reliable data on biomass flow properties for designing warehouses and processing equipment. This study investigates the physical properties of ground barley grains, ground oak leaves, ground straw, and cut jute. Barley grains, oak leaves, and straw bales were milled, and jute was cut into 2–3 mm lengths and oven-dried. Particle size distribution, bulk density, Hausner ratio, Carr’s index, moisture content, static angle of repose, and flowability tests and SEM analysis were conducted. The study found that ground barley, having the smallest particle size and highest bulk density, showed superior flow properties due to its rounded particles and clusters, as reflected by a low Hausner ratio. In contrast, jute fibers had a low bulk density and poor flowability, while ground straw exhibited hindered flow due to its larger, more irregular particles. Additionally, the biomass sliding behavior varied with particle size and surface irregularities, with ground barley adhering well to plywood and ground oak leaves adhering well to aluminum. These findings underscore the pivotal roles of particle shape and interparticle forces in determining the biomass flow properties, pointing towards a future where precise environmental control and advanced analytical methods drive innovations in biomass utilization.