Durability Performance of CGF Stone Waste Road Base Materials under Dry–Wet and Freeze–Thaw Cycles

Abstract

The disposal of stone waste derived from the stone industry is a worldwide problem. The shortage of landfills, as well as transport costs and environmental pollution, pose a crucial problem. Additionally, as a substitute for cement that has high carbon emissions, energy consumption, and pollution, the disposal of stone wastes by utilizing solid waste-based binders as road base materials can achieve the goal of “waste for waste”. However, the mechanical properties and deterioration mechanism of solid waste-based binder solidified stone waste as a road base material under complex environments remains incompletely understood. This paper reveals the durability performance of CGF all-solid waste binder (consisting of calcium carbide residue, ground granulated blast furnace slag, and fly ash) solidified stone waste through the macro and micro properties under dry–wet and freeze–thaw cycling conditions. The results showed that the dry–wet and freeze–thaw cycles have similar patterns of impacts on the CGF and cement stone waste road base materials, i.e., the stress–strain curves and damage forms were similar in exhibiting the strain-softening type, and the unconfined compressive strengths all decreased with the number of cycles and then tended to stabilize. However, the influence of dry–wet and freeze–thaw cycles on the deterioration degree was significantly different; CGF showed excellent resistance to dry–wet cycles, whereas cement was superior in freeze–thaw resistance. The deterioration grade of CGF and cement ranged from 36.15 to 47.72% and 39.38 to 47.64%, respectively, after 12 dry–wet cycles, whereas it ranged from 57.91 to 64.48% and 36.61 to 40.00% after 12 freeze–thaw cycles, respectively. The combined use of MIP and SEM confirmed that the deterioration was due to the increase in the porosity and cracks induced by dry–wet and freeze–thaw cycles, which in turn enhanced the deterioration phenomenon. This can be ascribed to the fact that small pores occupy the largest proportion and contribute to the deterioration process, and the deterioration caused by dry–wet cycles is associated with the formation of large pores through the connection of small pores, while the freeze–thaw damage is due to the increase in medium pores that are more susceptible to water intrusion. The findings provide theoretical instruction and technical support for utilizing solid waste-based binders for solidified stone waste in road base engineering.