Research on Pavement Performance of Cement-Stabilized Municipal Solid Waste Incineration Bottom Ash Base

Abstract

In order to clarify the influence of the municipal solid waste incineration bottom ash (MSWI BA) content on the pavement performance of the cement-stabilized macadam, the MSWI BA with 0%, 25%, 38% and 50% content was used instead of fine aggregates. To explore the feasibility of building pavement base with cement stabilized MSWI BA, the cement-stabilized MSWI BA mixture was prepared by mixing the MSWI BA at the mass fraction of 50%, 75% and 100% with fine crushed stuff. Subsequently, the compaction test and 7 days unconfined compression test were conducted with 4%, 5% and 6% cement dosage. The compaction test, unconfined compressive strength test, splitting strength test, compressive resilient modulus test and frost resistance tests were carried out based on the long-age samples with an optimal cement dosage of 5%. Furthermore, the unconfined compressive constitutive model was established based on the test data. Afterwards, the test road was built to measure the practical effect of MSWI BA on road construction. Meanwhile, energy-saving and emission-reduction analyses were conducted on the MSWI BA road. The results showed that under 5% cement dosage, the mechanical properties and frost resistance of the mixture with different MSWI BA content both satisfied the specification requirements; during the construction, the appropriate MSWI BA content could be selected according to the requirements of different highway grades in the specification. The established segmented constitutive model could well simulate the stress–strain relationship of the mixture in the compressive process. Using cement-stabilized MSWI BA to build the pavement base was feasible, which provided not only an important reference for the engineering design but also had positive significance for promoting carbon peaking, carbon neutrality and sustainable development of highway engineering construction.