Removal of Ammonium Ions from Aqueous Solutions Using Weathered Halloysite

Abstract

This study investigated the use of weathered halloysite as an ion exchange material for ammonium removal from water. The study was conducted under static and dynamic conditions. The influence of such parameters as the preliminary concentration of ammonium ions, dose of halloysite, and pH was examined in periodic studies. The ion exchange capacity of weathered halloysite under various regeneration conditions such as concentration, excess of regeneration solution and the pH at which the regeneration was performed was also determined. The effect of flow velocity, initial NH4+-ions concentration was studied in column tests and the weathered halloysite’s ion -exchange capacity was also determined. The best results of ammonium ion removal were obtained at pH 6. The equilibrium isotherms were described using the Langmuir and Freundlich models. The results of periodic studies show a good fit for the data of both models, with Langmuir isotherms reflecting the removal of ammonium ions better. A good match for the data (R2 > 0.99) was provided by a pseudo second-order kinetic model. The obtained results indicate that a properly prepared halloysite can be a useful mineral for the removal of dangerous substances, such as ammonium ions, present in natural waters.