Determination of Plastic Anisotropy of Extruded 7075 Aluminum Alloy Thick Plate for Simulation of Post-Extrusion Forming

Abstract

In this study, the plastic anisotropy distribution of an extruded 7075 aluminum alloy thick plate was evaluated through small-cube compression tests. The extruded plate with a thickness of 15 mm was divided into five layers in order to verify the difference in plastic anisotropy along the thickness direction of the extruded thick plate. Small-cube specimens with a side length of 1 mm were extracted from each layer and subjected to compression tests in each direction to evaluate the directional r-values of the extruded material. The r-values were applied to Hill’s quadratic yield criterion to calculate the six coefficients for each layer. To consider the plastic anisotropy in the thickness direction, a finite element model divided into five layers in the thickness direction was applied. Upsetting tests were conducted to verify the accuracy of the finite element analysis using cube specimens with a side length of 15 and 10.6 mm, and the results of the finite element analysis and the upsetting test were compared and analyzed against each other. Consequently, the finite element analyses were precisely simulated the upsetting test results.