Microstructure and Microhardness Evolution of Mg–8Al–1Zn Magnesium Alloy Processed by Differential Speed Rolling at Elevated Temperatures

Abstract

Mg–8Al–1Zn magnesium alloy was successfully processed using deferential speed rolling (DSR) at temperatures of 400 and 450 °C for thickness reduction of 30, 50, and 70% with no significant grain growth and dynamic recrystallization. Using optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the rolled microstructures were examined. Although the results indicate a slight reduction in grain size from the initial condition, the DSR processing of alloy at an elevated temperature was associated with a significant number of twins and a distribution of the fine particles of the second phase. The strength in terms of microhardness measurements and strain hardening in terms of shear punch testing was significantly improved in the rolled microstructure at room temperature. The existence of twins and widely distributed second-phase fine particles at twin boundaries reflected positively on the extent of the elongations in terms of shear displacements when microstructures were tested at elevated temperatures in the shear punch testing.