Abstract
To obtain the tire–pavement peak adhesion coefficient under different road states, a field measurement and FE simulation were combined to analyze the tire–pavement adhesion characteristics in this study. According to the identified texture information, the power spectral distribution of the road surface was obtained using the MATLAB Program, and a novel tire hydroplaning FE model coupled with a textured pavement model was established in ABAQUS. Experimental results show that here exists an “anti-skid noncontribution area” for the insulation and lubrication of the water film. Driving at the limit speed of 120 km/h, the critical water film thickness for the three typical asphalt pavements during hydroplaning was as follows: AC pavement, 0.56 mm; SMA pavement, 0.76 mm; OGFC pavement, 1.5 mm. The road state could be divided into four parts dry state, wet sate, lubricated state, and ponding state. Under the dry road state, when the slip rate was around 15%, the adhesion coefficient reached the peak value, i.e., around 11.5% for the wet road state. The peak adhesion coefficient for the different asphalt pavements was in the order OGFC > SMA > AC. This study can provide a theoretical reference for explaining the tire–pavement interactions and improving vehicle brake system performance.
Funder
National Natural Science Foundation of China
Nanjing University of Posts and Telecommunications
Subject
General Materials Science
Reference41 articles.
1. Research on Key Technology of Active Collision Avoidance Braking System Based on Pavement Identification;Zhang;Master’s Thesis,2017
2. Contact Mechanics, Soild Mechanics and Its Applications;Barber,2018
3. Tire Tread Pattern Optimization with Regard to Adhesion on Wet Surface;Zhang;Master’s Thesis,2013
4. Guide for Pavement Friction;Hall,2009
5. Evaluation of Adhesion and Hysteresis Friction of Rubber–Pavement System
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献