Innovative Approach of Concentrated Solar Sphere to Generate Electrical Power

Abstract

Energy sources are crucial for the development and growth of economies and civilizations. Solar energy is an alternative energy to generate electrical power. The challenges of solar photovoltaic panels (PV) are the low output power and efficiency and the huge installation area beside PVs need a tracking system for better efficiency. The motivation of this paper is to design an innovative solar sphere system, which is a new concentrated photovoltaic technology that has better performance (efficiency and output power) than the normal conventional solar panel (PV) with a smaller installation area and without any tracking system. This design consists of an acrylic solar sphere entirely filled with cooking oil (sunflower or corn oil) that captures solar radiation and concentrates it on a focal point. The focal point is adjusted over a multi-junction cell that acts as a collector device (concentrator solar cell). This focused solar energy can generate a massive amount of power, which is used to produce more electricity than normal photovoltaic panels. The experiments were carried out in order to discover the best acrylic models or shape designs, which is the sphere, the best materials or media in the sphere, that is oil, the best sphere’s size and volume, and that is larger, the best sphere thickness, which at first is lower, the best fluid oil type, which is cooking oil, and finally the best fluid amount or volume inside the sphere, and this is the entire volume. Then, these factors mentioned above are compared with normal photovoltaics (PV) that have the same section area as these shapes. The results revealed that these factors have significant effects on the output power value and efficiency. It has been demonstrated that our innovative concentrated solar sphere system can produce nearly four times the output power or electricity greater than that of a conventional solar panel PV with the same cross-sectional area. This specific sort of compression is crucial because it shows that less space is required to establish this system than it would to install conventional solar panels. The performance of the system per unit of the square area it occupies was compared to the latest generation of flat panel PV available at the market performance; hence, the installation space will be decreased by 40% to 60%. Our system has about twice as much efficiency as solar PV and does not require a tracking system and maintenance. Our technology also has the benefit of not being impacted by extreme temperatures, clouds, dust, and humidity.