Combining TRIGRS and DEBRIS-2D Models for the Simulation of a Rainfall Infiltration Induced Shallow Landslide and Subsequent Debris Flow

Abstract

TRIGRS revealed the responses of the total pressure heads and factors of safety with a depth change under a rainfall infiltration occurring on the Daniao tribe’s hill. The depth distribution of the collapsed zone could be identified under the condition where the factors of safety Fs = 1, and the results could calculate the area and volume. Afterward, DEBRIS-2D used TRIGRS’s results to assess the hazard zone of the subsequent debris flow motion. In this study, the DTM variation analysis results from both of before and after the Daniao tribe’s landslide are used to validate TRIGRS’s simulation, the area and the volume of the collapse zone within 8% and 23% errors, respectively. The real disaster range was depicted from the aerial photo used to validate the hazard zone simulation of DEBRIS-2D within 25% errors. In spite of that, the hazard zone from the simulation still included the real disaster range. The combining method for a rainfall infiltration induced a shallow landslide and subsequent debris flow, which was well-matched on a real disaster range on the Daniao tribe’s hill. Therefore, we believe that the TRIGRS and DEBRIS-2D combining methods would provide a better solution for an assessment of a rainfall infiltration inducing shallow landslide and subsequent debris flow motion. TRIGRS could, therefore, provide the area and depth distribution of the collapsed zone, and DEBRIS-2D could use TRIGRS’s results for subsequent debris flow hazard assessment. Furthermore, these results would be of great help in the management of slope disaster prevention.