Thermo-Mechanical Coupling Analysis of the Sealing Structure Stress of LNG Cryogenic Hose Fittings

Abstract

A cryogenic hose is used to transport liquefied natural gas at sea, where flexible fittings are sealed by corrugated lining and end flange welding. However, the extreme cryogenic temperatures of the conveyed fluid introduce substantial challenges to the integrity of the fitting seals’ structure during the LNG transfer process. In order to study the sealing performance of the fitting under LNG conveying conditions, this paper was based on the general finite element software ABAQUS 6.11 to carry out a thermo-mechanical coupling analysis of the end sealing stress. This paper also established a sealing performance analysis model of the corrugated fitting welding area under the fitting action of LNG load and internal pressure load. A sensitivity analysis was conducted on the influence of weld clearance, blunt edge size, and weld residual height on the weld stress of a fitting ring. The results show that, under the combined action of the medium internal pressure and cryogenic load, the size design of the weld area significantly affects the sealing performance of the fitting, among which the equivalent force of the weld clearance butt sealing area has the greatest impact. Moreover, it was found that a pressure of 5 MPa was 2 mm when the weld clearance was 2 mm, and the average stress at the weld was 53.68 MPa. Further, considering the synergistic influence of the blunt edge size, the weld clearance was 3 mm, the stress was minimal when the blunt side size was 4 mm, and the average stress was 17.42 MPa. These research results can serve as a reference for the design and analysis of the sealing structure of non-adhesive inner corrugated cryogenic hose fittings.