Accuracy Verification of Surface Models of Architectural Objects from the iPad LiDAR in the Context of Photogrammetry Methods

Abstract

The creation of accurate three-dimensional models has been radically simplified in recent years by developing photogrammetric methods. However, the photogrammetric procedure requires complex data processing and does not provide an immediate 3D model, so its use during field (in situ) surveys is infeasible. This paper presents the mapping of fragments of built structures at different scales (finest detail, garden sculpture, architectural interior, building facade) by using a LiDAR sensor from the Apple iPad Pro mobile device. The resulting iPad LiDAR and photogrammetric models were compared with reference models derived from laser scanning and point measurements. For small objects with complex geometries acquired by iPad LiDAR, up to 50% of points were unaligned with the reference models, which is much more than for photogrammetric models. This was primarily due to much less frequent sampling and, consequently, a sparser grid. This simplification of object surfaces is highly beneficial in the case of walls and building facades as it smooths out their surfaces. The application potential of the IPad LiDAR Pro is severely constrained by its range cap being 5 m, which greatly limits the size of objects that can be recorded, and excludes most buildings.