Modified LIX®84I-Based Polymer Inclusion Membranes for Facilitating the Transport Flux of Cu(II) and Variations of Their Physical–Chemical Characteristics

Abstract

A unique facilitation on the transport flux of Cu(II) was investigated by using modified polymer inclusion membranes (PIMs). LIX®84I-based polymer inclusion membranes (LIX®-based PIMs) using poly(vinyl chloride) (PVC) as support, 2-nitrophenyl octyl ether (NPOE) as plasticizer and Lix84I as carrier were modified by reagents with different polar groups. The modified LIX®-based PIMs showed an increasing transport flux of Cu(II) with the help of ethanol or Versatic acid 10 modifiers. The metal fluxes with the modified LIX®-based PIMs were observed varying with the amount of modifiers, and the transmission time was cut by half for the modified LIX®-based PIM cast with Versatic acid 10. The physical–chemical characteristics of the prepared blank PIMs with different Versatic acid 10 were further characterized by using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), contract angle measurements and electro-chemical impedance spectroscopy (EIS). The characterization results indicated that the modified LIX®-based PIMs cast with Versatic acid 10 appeared to be more hydrophilic with increasing membrane dielectric constant and electrical conductivity that allowed better accessibility of Cu(II) across PIMs. Hence, it was deduced that hydrophilic modification might be a potential method to improve the transport flux of the PIM system.