Enhancing Droplet Quality of Edible Ink in Single and Multi-Drop Methods by Optimization the Waveform Design of DoD Inkjet Printer

Abstract

The multi-drop method with a good droplet quality is a big challenge in inkjet technology. In this study, optimization of Drop on Demand (DoD) inkjet printer waveform design was conducted. The effectiveness of the waveform design, so-called W waveform, from previous study as a preliminary vibration for the multi-drop ejection method was investigated. The unmodified W waveform was proven not to be an effective waveform for lower viscosity of liquid, especially when compared by the standard waveform obtained from a print-head manufacturer. Edible ink with a viscosity below the optimum range for print-head specifications was employed as the operating liquid. The preliminary vibration W waveform was modified to improve the droplet quality of the edible ink. It was proven that a 40% adjusted voltage of the rear wave of the W waveform was effective as the optimum waveform design for edible ink. The droplet quality of the multi-drop ejection method for grey-scale technology was improved by optimizing the W waveform design.