Affiliation:
1. College of Chemical Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
2. College of Chemistry and Chemical Engineering, Yantai University, Yantai 264005, China
Abstract
This paper investigates the use of loaded Co/BETA molecular sieve catalysts for the selective oligomerization of isobutylene. The physicochemical properties of Co/BETA molecular sieves were characterized using XRD, BET, NH3-TPD, FT-IR, XPS, and Py-FTIR. The effects of different active component loadings, reaction temperatures, and reaction air velocities on the selective oligomerization of isobutylene were investigated in a fixed-bed reactor. The results showed that the catalytic effect was optimal when the Co loading was 6%, the reaction temperature was 60 °C, the reaction pressure was 1 MPa, and the reaction air speed was 1 h−1. The isobutylene conversion was greater than 74%, the C8= selectivity was approximately 70%, and the C8= yield reached 51.69% with minimal loss of n-butene, providing good catalytic capacity and efficiency.
Funder
Key Research and Development Plan of Shandong Province
Reference41 articles.
1. Highly efficient trimerization of isobutylene over silica-supported chloroaluminate ionic liquid using C4 feed;Liu;Catal. Today,2013
2. Coke deactivation and regeneration of HZSM-5 zeolite catalysts in the oligomerization of 1-butene;Epelde;Appl. Catal. B Environ.,2021
3. Low-pressure oligomerization of 1-butene to liquid fuels on HZSM-5 zeolite catalysts: Effect of operating conditions;Epelde;J. Ind. Eng. Chem.,2020
4. Fernandez-Morales, J.M., Castillejos, E., Asedegbega-Nieto, E., Dongil, A.B., Rodriguez-Ramos, I., and Guerrero-Ruiz, A. (2020). Comparative Study of Different Acidic Surface Structures in Solid Catalysts Applied for the Isobutylene Dimerization Reaction. Nanomaterials, 10.
5. Multiscale Modeling of Isobutane Alkylation with Mixed C4 Olefins Using Sulfuric Acid as Catalyst;Cao;Ind. Eng. Chem. Res.,2019