Abstract
The periodic nanotexture was superposed to the micro-textured grooves on the side surface of the punch. These grooves with nanotextures were shaped to have parallel and vertical orientations to the punch stroke direction, respectively. A stack of five amorphous electrical steel sheets was punched out with these micro-/nano-textured punches. The process affected zone at the vicinity of the punched hole was analyzed by SEM (Scanning Electron Microscopy) and a three-dimensional profilometer. The punch surfaces were also observed by SEM to describe the debris particle adhesion on them. The dimensional change in each layer of the stack before and after perforation was measured to describe the punching behavior with the comparison to the punch diameter.
Subject
General Materials Science
Reference15 articles.
1. Development of the amorphous motor balancing both resource saving and energy saving;Enomoto;J. Soc. Mech. Eng.,2014
2. Examination of Applying Amorphous Rolled Core to Permanent Magnet Synchronous Motors
3. Hitachi Metals. News Release. 24 October 2018
https://www.hitachi-metals.co.jp/e/press/pdf/2018/20181024en.pdf
4. Effect of Shearing Process on Iron Loss and Domain Structure of Non-oriented Electrical Steel
5. Shearing Characteristics of Amorphous Alloy Foils;Aoki;J. JSTEP,1986
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献