Affiliation:
1. School of Civil Engineering, Central South University, Changsha 410075, China
Abstract
In a humid environment, the stray current generated by subway operation will corrode the underground pipe network and the internal steel structure of the track plate, which will seriously affect the service life of the subway track plate and increase the maintenance cost later. Groundwater in subway projects mainly enters the concrete interior through capillary action and affects the concrete resistivity, and there is a lack of research on the mechanism of groundwater effect on concrete resistance. In this study, the variation of cement mortar resistivity with capillary water absorption time for cement mortar with different amounts of mineral admixtures (fly ash, ground-granulated blast furnace slag, and silica fume) was measured by the four-electrode method, and the mechanism of the influence of the electrical properties of cementitious materials under the effect of capillary water absorption was analyzed based on the mercury-pressure method (MIP) and thermogravimetric method (TG-DTG). The results show that with the increase in capillary water absorption time, the change curve of cement mortar resistivity can be divided into two stages; in the first stage, capillary water absorption leads to gel pores and transition pores quickly connecting to capillary pores and other large pores to form a water-saturated conductive pathway, resulting in a rapid decrease in resistivity, when the gel pores and excessive pores have a greater impact on resistivity. The second stage is that of capillary water absorption, to a certain extent, after the specimen’s internal water upward development rate slows down; at this time, the formation speed of the conductive pathway decreases, resulting in the rate of change in resistivity decreasing and gradually stabilizing. The incorporation of silica fume can effectively improve the resistivity of cementitious materials under the action of capillary water absorption, in which the resistivity of specimens incorporated with 15% silica fume after 36 days of capillary water absorption is 10.39 times that of the reference group, which is mainly due to its lower porosity and a higher percentage of gel pores.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science