Selection of the Winding Type of Solid-State Transformers in Terms of Transmitting the Greatest Possible Power in the Frequency Range from 500 Hz to 6000 Hz-Reference-Cited by-同舟云学术

Selection of the Winding Type of Solid-State Transformers in Terms of Transmitting the Greatest Possible Power in the Frequency Range from 500 Hz to 6000 Hz

Published:2023-09-11 Issue:18 Volume:16 Page:6528
ISSN:1996-1073
Container-title:Energies
language:en
Short-container-title:Energies

Author:

Lesniewska Elzbieta¹^ORCID,Roger Daniel²^ORCID

Affiliation:

1. Institute of Mechatronics and Information Systems, Lodz University of Technology, 90-924 Lodz, Poland

2. LSEE ER4025, University of Artois, 62400 Béthune, France

Abstract

Solid-state transformer (SST) is an emerging technology that integrates with transformer power electronics converters and control. The most noticeable advantages of SST are the size and weight reduction compared with low-frequency transformers. Since this device is used in many devices such as smart grids, traction systems, systems with renewable energy sources (RESs) and electric vehicle charging devices, it is important to build a high-efficiency device at a low cost. The article evaluates a medium frequency transformer (SST) operating at a frequency of 500 Hz to 6000 Hz with coils wound with aluminum foil or Litz windings and of a grain-oriented electrical steel (GOES) core. The calculations were made using the 3D field method using the numerical finite element method, and the results were compared with the tests of the real model. The measurement method based on the Fourier analysis of real signals was used for the research.

Publisher

MDPI AG

Subject

Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction

Link

https://www.mdpi.com/1996-1073/16/18/6528/pdf

Reference32 articles.

1. Ortiz, G., Leibl, M., Kolar, J.W., and Apeldoorn, O. (2013, January 22–25). Medium Frequency Transformers for Solid-State-Transformer Applications—Design and Experimental Verification. Proceedings of the IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS), Kitakyushu, Japan.

2. Design Methodology for Inductor-Integrated Litz-Wired High-Power Medium-Frequency Transformer with the Nanocrystalline Core Material for Isolated DC-Link Stage of Solid-State Transformer;Chen;IEEE Trans. Power Electron.,2020

3. Blaabjerg State of the Art of Solid-State Transformers: Advanced Topologies, Implementation Issues, Recent Progress and Improvements;Hannan;IEEE Access,2020

4. Design Methodology and Optimization of a Medium-Frequency Transformer for High-Power DC–DC Applications;Bahmani;IEEE Trans. Ind. Appl.,2016

5. Rylko, M., Hartnett, K., Hayes, J., and Egan, M. (2009, January 15–19). Magnetic material selection for high power high frequency inductors in dc-dc converters. Proceedings of the 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition, Washington, DC, USA.