Abstract
In the present study, AA2024 aluminum alloy and AISI304 stainless steel were welded in a lap joint configuration by Probeless Friction Stir Spot Welding (P-FSSW) with a flat surface tool. A full factorial DOE plan was performed. The effect of the tool force (4900, 7350 N) and rotational speed (500, 1000, 1500, 2000 RPM) was analyzed regarding the microstructure and microhardness study. A two-dimensional arbitrary Eulerian–Lagrangian FEM model was used to clarify the temperature distribution and material flow within the welds. The experimental results for the weld microstructures were used to validate the temperature field of the numerical model. The results showed that the tool rotation speed had an extensive influence on the heat generation, whereas the load force mainly acted on the material flow.
Funder
DMMM—Polytechnic University of Bari
Subject
General Materials Science
Reference30 articles.
1. Gullino, A., Matteis, P., and D’Aiuto, F. (2019). Review of Aluminum-To-Steel Welding Technologies. Metals, 9.
2. A review on resistance spot welding of aluminum alloys;Int. J. Adv. Manuf. Technol.,2017
3. Control of intermetallic compound layers at interface between steel and aluminum by diffu-sion-treatment;Mater. Sci. Eng. A,2002
4. Study on the fiber laser/TIG weldability of AISI 304 and AISI 410 dissimilar weld;J. Manuf. Processes,2018
5. Investigation of Microstructural and Mechanical Properties of Dissimilar Metal Weld Between AISI 420 and AISI 1018 Steels;Arab. J. Sci. Eng.,2022
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献