Lattice Boltzmann Simulation of Ferrofluids Film Boiling

Abstract

In the present investigation, two phase film boiling of ferrofluids under an external field delivered around a two-dimensional square cross-section heater was investigated using the lattice Boltzmann technique. The purpose of this work is to find the effect of magnetic field magnitude and direction on the Nusselt number in single and double heater geometry. The improving thermal efficiency in the horizontal and vertical placement of heaters is also presented. The governing equations of mass conservation, momentum conservation, and energy conservation are solved by using a central-moments-based Lattice Boltzmann scheme. The air pocket generated around heater raised incorporating magnetic effects. The heat transfer through this advancement has been explored quantitatively and abstractly. The results shows that with the development in the volumetric applied force at the bubble-fluid interface, the bubble boundary layer thickness around the square heater lessened which cause the Nusselt number augmented. Through the parameter study it found that the Nusselt number can be essentially extended by altering the course of magnet shafts, and that film rising outwardly of the bubble. The improvement and advancement of vapour phase in various heater arrangement made two column of bubble rises at the same time, which rose above each heater and in the end changed into one column of bubble. A correlation considering magnitude and angle of the magnetic field on time-averaged Nusselt number is presented. Finally, the Nusselt number can be controlled with the help of the incorporation of other heaters.