ZnO Nanoparticles Anchored on a N-Doped Graphene-Coated Separator for High Performance Lithium/Sulfur Batteries

Abstract

Fabrication of a nanocrystalline zinc oxide (ZnO)/nitrogen-doped graphene (NDG) composite using a novel and facile in situ sol-gel technique is demonstrated in this study. A two-dimensional nanostructured morphology with uniform ZnO nanoparticles (average diameter of 10 ± 4 nm) anchored on NDG nanosheets was observed via electron microscopy. The polar heteroatoms on the graphene sheets provided abundant sites for polysulfide absorption. More importantly, the strong chemical interaction between ZnO and polysulfides efficiently hindered the transport of polysulfides. Consequently, the lithium/sulfur (Li/S) battery with the ZnO/NDG composite-coated separator exhibited enhanced performance in terms of discharge capacity and cycling stability compared to the cell with a conventional separator. With the modified separator, the Li/S battery achieved a discharge capacity of 942 mAh·g−1 after the first cycle and exhibited a capacity retention of 90.02% after the 200th charge/discharge test at 0.1 C. These results indicate that suppression of the shuttling of polysulfides efficiently improves the performance of the Li/S battery.