Edge-Drop Control Behavior for Silicon Strip Cold Rolling with a Sendzimir Mill

Abstract

Edge-drop control is important for silicon strip cold rolling, as the silicon strip is mainly used as a laminated core. Moreover, cold rolling is the key process for the thin strip edge-drop control, and a Sendzimir mill is one of the most popular cold rolling mills for silicon strips. Thus, the mastery of edge-drop control behavior for silicon strip cold rolling with a Sendzimir mill is beneficial for the improvement of the strip profile quality. With the finite element method, two models are built to analyze the edge-drop control behavior, one is the roll system and strip integrated elastic-plastic deformation statics model, and the other is the strip plastic deformation dynamics model. The first model provides the roll gap contour for the second model, then the strip profile can be calculated in the second model, which considers the transverse flow of the metal. Firstly, the compositions of edge-drop for the silicon strip are analyzed systematically, which are the edge-drop for work roll bending, the edge-drop for work roll flattening, and the edge-drop for transverse flow of the metal. Secondly, the influence of different rolling process parameters on the three parts are analyzed, such as the entrance thickness, the rolling reduction, the rolling tension, and so on; further, the influence of the roll contours are also analyzed. Finally, the edge-drop control behavior of the different rolling process parameters and roll contours are obtained. The research results provide theoretical guidance for edge drop control in the Sendzimir mill.