Affiliation:
1. Key Laboratory of Impact and Safety Engineering, Ministry of Education, Ningbo University, Ningbo 315211, China
2. College of Science & Technology, Ningbo University, Ningbo 315300, China
Abstract
PC/ABS composites are commonly used in airbag covers. In this paper, uniaxial tensile experiments of a PC/ABS composite at different temperatures and strain rates were conducted. The results showed that the temperature and loading rate affect the mechanical properties of the PC/ABS composite. As the temperature increases, the yield stress decreases and the strain at the moment of fracture increases, but the strain rate at the same temperature has a relatively small effect on the mechanical properties, which are similar to ductile materials. The experimental results were applied to the Abaqus model which considered thermal effects and the exact Johnson–Cook constitutive parameters were calculated by applying the inverse method. Based on the constitutive model and the failure analysis findings acquired by DIC, the uniaxial tensile test at the room temperature and varied strain rates were simulated and compared to the test results, which accurately reproduced the test process. The experiment on target plate intrusion of the PC/ABS composite was designed, and a finite-element model was established to simulate the experimental process. The results were compared with the experiments, which showed that the constitutive and the failure fracture strains were valid.
Funder
the Ningbo 2025 Science and Technology Innovation Major Project