Affiliation:
1. “Ilie Murgulescu” Institute of Physical Chemistry, Romanian Academy, 202 Splaiul Independentei, 060021 Bucharest, Romania
Abstract
The propagation speeds of premixed n-butane–air mixtures (2.0–5.7 vol%) were investigated under various initial conditions (pressures of 0.4–1.2 bar; temperatures of 289–500 K). The study consists of both, experimental measurements using two different enclosures (a sphere and a cylinder) and kinetic modeling via a dedicated computing program. The propagation speeds of premixed n-butane–air mixtures were obtained via the adiabatic model of flame propagation, which allows us to obtain these important parameters using the normal burning velocities and expansion coefficients. The expansion coefficients were calculated using thermodynamic data as the ratio of burnt to unburnt gas densities, assuming that an equilibrium was established in the flame front. The propagation speeds obtained based on the experimental burning velocities were analyzed for comparison with the computed velocities. Finally, the dependence of the propagation speed on the initial pressure and temperature was discussed.
Funder
Ministry of Research, Innovation and Digitization, CNCS-UEFISCDI
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference36 articles.
1. Performance and emission characteristics of a CI engine operated with n-butane blended DME fuel;Lee;Appl. Therm. Eng.,2011
2. Lewis, B., and von Elbe, G. (1987). Combustion, Flames and Explosion of Gases, Academic Press. [3rd ed.].
3. Hattwig, M., and Steen, H. (2004). Handbook of Explosion Prevention and Protection, Wiley VCH Verlag.
4. Measurements of laminar flame velocity for components of natural gas;Dirrenberger;Energy Fuels,2011
5. Laminar burning velocity of n-butane/Hydrogen/Air mixtures at elevated temperatures;Jithin;Energy,2019