Abstract
This paper establishes the optimal thickness of TiN ceramic coating on the surface of Mg-Ca-Zn alloy using optical and scanning microscopy methods. X-ray diffraction analysis and tests on its mechanical properties showed that deposition of coating with a thickness of not less than 1 μm on the alloy causes a uniform distribution of the TiN phase over the magnesium alloy surface. The TiN coating also contributes to simultaneous increases in the yield strength, tensile strength, ductility and microhardness of the Mg-Ca-Zn alloy.
Funder
Ministry of Science and Higher Education of the Russian Federation
Subject
General Materials Science,Metals and Alloys
Reference30 articles.
1. Recent progress in magnesium–lithium alloys;Wu;Int. Mater. Rev.,2015
2. Dobrzański, L.A., Dobrzańska-Danikiewicz, A.D., Dobrzański, L.B., and Dobrzańska, J. (2021). The Importance of Synthesis and Characterization of Biomedical Materials for the Current State of Medicine and Dentistry. Processes, 9.
3. The current trends of Mg alloys in biomedical applications—A review;Riaz;J. Biomed. Mater. Res. Part B Appl. Biomater.,2019
4. Huang, J., Li, X., and Guo, Z.X. (2020). Biocompatibility and Performance of Medical Devices, Woodhead Publishing.
5. Challenges in the use of zinc and its alloys as biodegradable metals: Perspective from biomechanical compatibility;Li;Acta Biomater.,2019
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献