Affiliation:
1. Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10 000 Zagreb, Croatia
2. Ruđer Bošković Institute, Bijenička Cesta 54, 10 000 Zagreb, Croatia
3. Croatian Accreditation Agency, Ulica Grada Vukovara 78, 10 000 Zagreb, Croatia
Abstract
Zirconium-doped ceria is a promising and extensively researched catalytic material with notable use in three-way catalytic converters, the oxidation of volatile organic compounds and solid oxide fuel cells. In this work, pure and zirconium-doped ceria nanoparticles (Ce1−xZrxO2, where x = 0, 0.1, 0.2, and 0.3) were prepared by combustion synthesis using glycine as the fuel and cerium and zirconium nitrate as oxidants. The obtained powders were characterized using X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential thermal and thermogravimetric analysis, UV–Vis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. The combustion temperature increases with the increase in zirconium content in the samples, but the XRD patterns exclusively show ceria diffraction peaks. The crystallite sizes are in the range from 25.2 to 11.7 nm, and do not vary substantially after thermal treatment, indicating the good thermal stability of the prepared nanocatalysts. XPS analysis showed that the surface amount of zirconium is lower than the nominal and that the ceria sample with 10 mol. % of zirconium has a higher amount of oxygen vacancies than the 30 mol. % Zr-doped sample. The 10 mol. % Zr-doped sample displays the best catalytic activity in the BTEX (benzene, toluene, ethylbenzene, and o-xylene) oxidation process.
Funder
Croatian Science Foundation
Subject
Inorganic Chemistry,Condensed Matter Physics,General Materials Science,General Chemical Engineering