Binder-Free Two-Dimensional Few-Layer Titanium Carbide MXene Ink for High-Performance Symmetric Supercapacitor Device Applications

Abstract

A heightened interest in developing MXene (Ti3C2Tx) for energy storage is evident in binder-free MXene ink being directly applied to current collector Ni-foam. Moreover, 2D titanium carbide MXene, with a few layers of nanostructure, has been prepared for symmetric supercapacitor device applications. As-prepared MXene nanosheets exist in two forms: dried powder and ink, achieved through wet-chemical etching and dimethyl sulfoxide delamination from the MAX (Ti3AlC2) phase. This comparative study of electrode devices involves (i) MX-dry powder with binder/additive electrodes and (ii) binder-free MXene inks with directly applied MX-conductive inks. The surface morphological images of pure MX-powder/ink display few layers, and material analysis reveals the good crystalline nature of delaminated MXene (Ti3C2Tx) inks. The electrochemical symmetric supercapacitor device performances of pure MXene powder and binder-free directly applied/coated MXene (Ti3C2Tx) ink, in terms of cyclic voltammetry (CV) and impedance spectroscopy (EIS), exhibit galvanostatic charge–discharge (GCD) curves that show high specific capacitance (Csp) at 105.75 F/g at a current density of 1 A/g. A comparison of active material electrodes demonstrated excellent cycle stability. Hence, in this work, we confirmed the superior capacitive behavior of binder-free MXene ink (MX-I) compared to conductive additives with polymeric binders included in MXene electrodes.