Affiliation:
1. School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China
2. School of Chemistry and Materials Science, University of Science and Technology of China, Hefei 230026, China
Abstract
In order to improve the wear resistance of copper and enhance the surface properties of copper parts, this article uses BN nanoparticles as a reinforcing phase and the laser remelting method to prepare a Cu/BN remelted layer on the copper surface. The surface morphology, crystal structure, microhardness, and wear resistance of the samples were tested and characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), a microhardness tester, and a friction and wear tester. The effects of laser frequency, pulse width, and energy density on the surface morphology and wear resistance of the samples were analyzed and studied, and the effects of the laser parameters on the properties of the Cu/BN remelted layer were discussed. The research results indicate that laser frequency, pulse width, and energy density have a direct impact on the surface morphology and properties of the Cu/BN remelted layer, but the impact mechanism by the above parameters on the remelted layer is different. The effects of laser frequency on the remelted layer are caused by changes in the overlap mode of the remelting points, while laser pulse width and energy density are achieved through changes in remelting intensity. When the laser frequency is 10 Hz, the pulse width is 10 ms, and the energy density is 165.8 J/mm2, the Cu/BN remelted layer has better surface properties.
Funder
the Scientific Research Foundation for Doctoral of Suzhou University
the Open Project of Suzhou University Research Platform
the Teaching and Research Project of Suzhou University
the Natural Science Research Project in the Universities of Anhui Province in China
the Anhui Higher Education Quality Engineering Project
Reference29 articles.
1. TiB2 embedded borosilicate coatings with improved wear resistance;Copoglu;Surf. Eng.,2021
2. Wear resistance of Sm2O3-doped high alumina-based grinding medium;Liu;Tribol. Int.,2022
3. Improving the wear resistance of 440C bearing steel balls by adding ZrO2 in mechanical alloying;Liu;Wear,2024
4. Li, H., Chen, Y., Chen, S., Liu, Y., and Liu, C. (2024). The Influence of Laser Remelting Parameters on the Surface Quality of Copper. Micromachines, 15.
5. Fan, D., Zhang, H., Huang, J.K., Li, Y., and Xie, Y.H. (2024). Ultrasonic assisted SiO2 nanoparticles strengthened Al/Cu plasma arc welding process. J. Mater. Eng., Available online: https://link.cnki.net/urlid/11.1800.TB.20240829.1005.004.