Heat Stability and Icing Delay on Superhydrophobic Coatings in Facile One Step

Abstract

Superhydrophobic coatings are limited to poor durability and a tedious preparation process. In this work, an efficient, eco-friendly, and cost-effective sol-gel method is developed for preparing superhydrophobic surfaces using an all-in-one suspension composed of methyltrimethoxysilane (MTMS), nano silicon dioxide (SiO2) particles, and micron zinc oxide (ZnO) particles. Superhydrophobic coatings with a contact angle (CA) up to 153.9° and a sliding angle (SA) of about 3.0° are prepared on Q235 steel substrates using MTMS 5 mL, 0.8 g of nano SiO2, and 0.2 g of micron ZnO. The morphology of the superhydrophobic coating is characterized by scanning electron microscopy (SEM), and the surface is covered with a micro- and nano-scaled hierarchical rough structure. A series of tests are conducted, including long-term stability tests and thermostability tests. The CAs are all above 150°, and the SAs are below 6.3°, indicating the excellent static stability of the prepared superhydrophobic coatings. Moreover, the CA of the superhydrophobic coating remains above 152° after 120 h of UV exposure, and the time for a water droplet to freeze on the surface of the superhydrophobic coating is 18 times of the bare Q235 steel, indicating that the superhydrophobic coating exhibits good resistance to UV radiation and icing-delay properties.