Preparation and Properties of PED-TDI Polyurethane-Modified Silicone Coatings

Abstract

To explore the influence mechanisms of polyurethane soft segments on modified silicone coatings, a series of modified coatings was prepared by introducing different contents of hydroxypropyl-terminated polydimethylsiloxane (PDMS2200) into the soft segment of polyurethane. ATR-FTIR, NMR, CLSM, AFM, contact angle measurement, the tensile test, bacterial adhesion, and the benthic diatom adhesion test were used to investigate the structure, morphology, roughness, degree of microphase separation, surface energy, tensile properties, and antifouling properties of the modified coatings. The results show that PDMS2200 could aggravate the microphase separation of the modified coatings, increase the surface-free energy, and reduce its elastic modulus; when the microphase separation exceeded a certain degree, increasing PDMS2200 would decrease the tensile properties. The PED-TDI polyurethane-modified silicone coating prepared with the formula of PU-Si17 had the best tensile properties and antifouling properties among all modified coatings.