Tensile Properties of Curaua–Aramid Hybrid Laminated Composites for Ballistic Helmet

Abstract

A typical ballistic protection helmet for ground military troops has an inside laminate polymer composite reinforced with 19 layers of the aramid, which are neither recyclable or biodegradable and are relatively expensive. The hybridization of synthetic aramid with a natural lignocellulosic fiber (NLF) can provide a lower cost and desirable sustainability to the helmet. In the present work, the curaua fiber, one of the strongest NLFs, is, for the first time, considered in non-woven mat layers to partially replace the aramid woven fabric layers. To investigate the possible advantage of this replacement, the tensile and impact properties of aramid/curaua hybrid laminated composites intended for ballistic helmets, in which up to four layers of curaua were substituted for the aramid, were evaluated. Tensile strength, toughness, and elastic modulus decreased with the replacement of the aramid while the deformation of rupture was improved for the replacement of nine aramid layers by two layers of curaua. Preliminary impact tests corroborate the decreasing tendency found in the tensile properties with the replacement of the aramid by curaua. Novel proposed Reduction Maps showed that, except for the replacement of four aramid layers by one layer of curaua, the decrease percentage of any tensile property value was lower than the corresponding volume percentage of replaced aramid, which revealed advantageous hybridization for the replacement of nine or more aramid layers.