Performance Evaluation of Ultra-Thin Wearing Course with Different Polymer Modified Asphalt Binders

Abstract

Ultra-thin wearing course (UTWC) as an asphalt overlay is widely used in pavement maintenance for extending pavement service life. Researchers focused on improving and evaluating its performance, yet few researchers compare the performance of typical UTWCs. Moreover, some traditional asphalt mixture tests are improper for UTWC due to the thicknesses of UTWC, which is thinner than the traditional asphalt overlay. This study further evaluated the advantages and disadvantages of typical UTWCs. A series of tests were conducted to compare the comprehensive performance of three typical UWTC products, including SMA-10, Novachip-B, and GT-10. Moreover, this study improved the rutting test to evaluate its rutting performance more accurately. Rutting specimens of 20 mm thick and 50 mm thick composite specimens (20 mm UTWC + 30 mm Portland cement concrete slabs) were prepared. Two types of PCC slabs were used, including unprocessed PCC slabs and PCC slabs with preset cracks. The test results showed that Novachip-B showed the best water stability and weakest raveling resistance, while GT-10 showed the best fatigue and anti-skid performance. The rutting performance of UTWCs was reduced because of the influence of preset cracks. The rutting depth of GT-10 was only 60–90% of that of others, showing the comprehensive performance of GT-10 was better than that of others. These results provide a significant reference for the research and application of UTWC.