Ozonation Processes for Color Removal from Urban and Leather Tanning Wastewater

Abstract

The need to ensure adequate levels of both human and environmental health protection calls for the identification of efficient wastewater treatment processes that target the removal of conventional pollutants as well as emerging contaminants, including synthetic dyes. This study explores the potential of ozone for use in the decolorization of both pretreated tannery wastewater and urban wastewater effluents. Different ozone contact times (15, 30, and 45 min) were applied to such wastewater samples at an uncontrolled (7.5–8.2) pH as well as at a pH adjusted to 10. The highest color removal efficiencies (REs) (>90%) were obtained with urban wastewater after a 45 min contact time and at pH 10. Under the same conditions, a COD RE from 31 to 51% was achieved. Even without pH adjustment, color and COD REs ranging from 81 to 92% and 39 to 41%, respectively, were obtained. A preliminary evaluation of the costs associated with the implementation of an ozonation stage within the wastewater treatment plant (WWTP) generating the urban wastewater used here was carried out. The energy cost of the ozone treatment would account for a 69% increase in the total energy cost of the WWTP, suggesting the need to identify proper strategies to enhance the cost-competitiveness of this technology.