Numerical Study of Wheat Particle Flow Characteristics in a Horizontal Curved Pipe

Abstract

Energy consumption is one of the important indicators of green development. The pressure drop and the particle kinetic energy loss in the pipe bend result in high energy consumption of wheat pneumatic conveying. In this paper, the CFD-DEM method is used to study the characteristics of flow field in horizontal pipe bend. The results show that the particles converge together under the force of the curved pipe wall to form a particle rope. With increasing pipe bend ratio R/D, the aggregation of particle bundles becomes stronger and the particle spiral phenomenon decreases. The particles impact the pipe wall at an angular position of θ = 30–60° around the bend, and their velocity decreases slowly under the friction resistance of the pipe wall. The velocity loss caused by particles impacting on the pipe wall increases with increasing initial velocity. When the particle mass flow rate is 1.26 kg/s and the gas velocity is 10 m/s, the pressure drop in the bend decreases and then increases with increasing R/D. The pressure drop of the bend is smallest for R/D = 2 and increases gradually with increasing gas-phase velocity. With increasing of R/D, the wall shear force between the particles and the bending pipe decreases and then increases, and the position of the maximum force moves towards the bottom of the bending pipe. The area over which the wall shear force acts continues to decrease because of the aggregation of particle bundles. The research results provide a theory for optimal design and application of pneumatic conveying equipment for wheat particles.