Affiliation:
1. Department of Mechanical Engineering, Kunsan National University, 558 Daehak-ro, Miryong-dong, Gunsan 54150, Jeollabuk-do, Republic of Korea
Abstract
In this work, a test bed and stand structure were designed for the thrust test of an aircraft. The engine test rig consists of a thrust stand, test bed, transport system, and hoisting device. In this study, structural design and analysis of the stand and bed for engine thrust test equipment were performed. The stand structure supported the engine, and the test bed moved the thrust test equipment and the engine. Structural design loads were defined by analyzing the operating conditions. Structural analysis was performed based on the structural design results. As a result of analyzing the structural safety against thrust, which is the main design load, it was considered to be sufficiently safe. Finally, the target structure was manufactured to verify the design result.
Funder
Korea Institute for Advancement of Technology
National Research Foundation of Korea
Reference15 articles.
1. (2023, February 01). GE Aerospace. Available online: https://www.geaviation.com/propulsion/military/f404.
2. Haag, T.W. (1989, January 12–16). Design of a thrust stand for high power electric propulsion devices. Proceedings of the 25th Joint Propulsion Conference, Monterey, CA, USA.
3. Thrust stand for high-power electric propulsion devices;Haag;Rev. Sci. Instrum.,1991
4. Mondragon, J.M., and Hubbard, J.E. (2017, January 9–13). Design, build, and test of a thrust test stand. Proceedings of the 55th AIAA Aerospace Sciences Meeting, Grapevine, TX, USA.
5. Smith, R.E., and Wehofer, S. (1982, January 22–24). Measurement of engine thrust in altitude ground test facilities. Proceedings of the 12th Aerodynamic Testing Conference Sciences Meeting, Williamsburg, VA, USA.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献