Numerical Investigation of Mineral Grain Shape Effects on Strength and Fracture Behaviors of Rock Material

Abstract

Rock is an aggregate of mineral grains, and the grain shape has an obvious influence on rock mechanical behaviors. Current research on grain shape mostly focuses on loose granular materials and lacks standardized quantitative methods. Based on the CLUMP method in the two-dimensional particle flow code (PFC2D), three different grain groups were generated: strip, triangle, and square. Flatness and roughness were adopted to describe the overall contour and the surface morphology of the mineral grains, respectively. Simulated results showed that the grain shape significantly affected rock porosity and further influenced the peak strength and elastic modulus. The peak strength and elastic modulus of the model with strip-shaped grains were the highest, followed by the models with triangular and square grains. The effects of flatness and roughness on rock peak strength were the opposite, and the peak strength had a significant, positive correlation with cohesion. Tensile cracking was dominant among the generated microcracks, and the percentage of tensile cracking was maximal in the model with square grains. At the postpeak stage, the interlocking between grains was enhanced along with the increased surface roughness, which led to a slower stress drop.