Hydrodynamic Decontamination of Groundwater and Soils Using ZVI

Abstract

Polluted aquifers can be decontaminated using either ZVI (zero valent iron) permeable reactive barriers (PRB) or injected ZVI. The placement of ZVI within the aquifer may take several decades to remediate the contaminant plume. Remediation is further complicated by ZVI acting as an adsorbent to remove some pollutants, while for other pollutants, it acts as a remediation catalyst. This study investigates an alternative aquifer decontamination approach to PRB construction or n-Fe0 injection. The alternative approach reconstructs the potentiometric surface of the aquifer containing the contaminant. This reconstruction confines the contaminant plume to a stationary, doughnut shaped hydrodynamic mound. Contaminated water from the mound is abstracted, decontaminated, and then reinjected, until all the water confined within the mound is decontaminated. At this point, the decontaminated mound is allowed to dissipate into the surrounding aquifer. This approach is evaluated for potential use in treating the following: (i) immiscible liquid plumes; (ii) miscible contaminant and ionic solute plumes; (iii) naturally contaminated aquifers and soils; and (iv) contaminated or salinized soils. The results indicate that this approach, when compared with the PRB or injection approach, may accelerate the decontamination, while reducing the overall amount of ZVI required.