Abstract
Floating treatment wetland (FTW) is an innovative, cost effective and environmentally friendly option for wastewater treatment. The dyes in textile wastewater degrade water quality and pose harmful effects to living organisms. In this study, FTWs, vegetated with Phragmites australis and augmented with specific bacteria, were used to treat dye-enriched synthetic effluent. Three different types of textile wastewater were synthesized by adding three different dyes in tap water separately. The FTWs were augmented with three pollutants degrading and plant growth promoting bacterial strains (i.e., Acinetobacter junii strain NT-15, Rhodococcus sp. strain NT-39, and Pseudomonas indoloxydans strain NT-38). The water samples were analyzed for pH, electrical conductivity (EC), total dissolved solid (TDS), total suspended solids (TSS), chemical oxygen demand (COD), biological oxygen demand (BOD), color, bacterial survival and heavy metals (Cr, Ni, Mn, Zn, Pb and Fe). The results indicated that the FTWs removed pollutants and color from the treated water; however, the inoculated bacteria in combination with plants further enhanced the remediation potential of floating wetlands. In FTWs with P. australis and augmented with bacterial inoculum, pH, EC, TDS, TSS, COD, BOD and color of dyes were significantly reduced as compared to only vegetated and non-vegetated floating treatment wetlands without bacterial inoculation. Similarly, the FTWs application successfully removed the heavy metal from the treated dye-enriched wastewater, predominately by FTWs inoculated with bacterial strains. The bacterial augmented vegetated FTWs, in the case of dye 1, reduced the concentration of Cu, Ni, Zn, Fe, Mn and Pb by 75%, 73.3%, 86.9%, 75%, 70% and 76.7%, respectively. Similarly, the bacterial inoculation to plants in the case of dye 2 achieved 77.5% (Cu), 73.3% (Ni), 83.3% (Zn), 77.5% (Fe), 66.7% (Mn) and 73.3% (Pb) removal rates. Likewise in the case of dye 3, which was treated with plants and inoculated bacteria, the metals removal rates were 77.5%, 73.3%, 89.7%, 81.0%, 70% and 65.5% for Cu, Ni, Zn, Fe, Mn and Pb, respectively. The inoculated bacteria showed persistence in water, in roots and in shoots of the inoculated plants. The bacteria also reduced the dye-induced toxicity and promoted plant growth for all three dyes. The overall results suggested that FTW could be a promising technology for the treatment of dye-enriched textile effluent. Further research is needed in this regard before making it commercially applicable.
Subject
Management, Monitoring, Policy and Law,Renewable Energy, Sustainability and the Environment,Geography, Planning and Development
Reference62 articles.
1. Agricultural water pollution: key knowledge gaps and research needs
2. A review of textile industry: Wet processing, environmental impacts, and effluent treatment methods
3. Environmental and health effects of textile industry wastewater;Khan,2014
4. Textile Organic Dyes—Characteristics, Polluting Effects and Separation/Elimination Procedures from Industrial Effluents—A Critical Overview, Organic Pollutants Ten Years after the Stockholm Convention-Environmental and Analytical Update;Carmen,2012
5. In situ phytoremediation of dyes from textile wastewater using garden ornamental plants, effect on soil quality and plant growth