Numerical Simulation of Vacuum Preloading for Reinforcing Soil inside Composite Bucket Foundation for Offshore Wind Turbines

Abstract

The composite bucket foundation (CBF) with seven honeycomb subdivisions is a new foundation for offshore wind turbine structures. The bearing capacity of CBF can be improved by consolidation of soil inside the CBF, which is caused by the vacuum preloading method after installation. A three-dimensional numerical model is established to simulate the consolidation process of soil for CBF with and without subdivisions in terms of vertical settlement, pore water pressure and void ratio of the soil. This analysis investigates the reinforcement effect of the two foundation types to assess the influence of the bulkheads. The results obtained show that there are obvious reinforcement effects for both foundation types. In the early stage of consolidation, vertical settlement is rapid, and this becomes stable with time. The depth at which the pore water pressure becomes negative is the depth showing the main reinforcement. Vacuum pressure decreases continuously with increase in soil depth and time. In addition, the excess pore water pressure in the soil dissipates, which turns into the soil effective stress. Bulkheads provide vertical drainage channels in the soil and shorten the seepage path, allowing the extraction of more pore water. This is conducive to the improvement of shallow soil, while also decreasing the extraction of pore water in deep soil and the region of the soil that can be reinforced.