Enhanced Adsorption of Arsenate from Contaminated Waters by Magnesium-, Zinc- or Calcium-Modified Biochar—Modeling and Mechanisms

Abstract

The adsorption of arsenate from wastewaters was investigated by applying Mg-, Zn- or Ca-modified nut residue biochar activated by nitrogen/steam. The parameters studied were the contact time, adsorbent dose, initial arsenate concentration and solution pH. The adsorption mechanism was investigated. Various analyses of the material before and after arsenate adsorption were carried out, and experimental data were simulated by applying two isotherm models. The results indicated that the maximum removal efficiency of arsenate was 29.4% at an initial concentration of 10 mg/L. The modification of biochar by Mg, Zn or Ca oxides increased the removal rate significantly, from 49.4% at 100 mg/L As5+ up to 8%, 97% and 97%, respectively. Zn-modified biochar presented an excellent performance for both low and high As5+ concentrations. All experimental data were accurately fitted by the Freundlich isotherm model (R2 = 0.94–0.97), confirming a multilayer adsorption mechanism. For a biochar dose of 2 g/L, the maximum capacity of adsorption was enhanced after Mg-, Zn- or Ca-modification from 12.4 mg/g to 35 mg/g, 50 mg/g and 49 mg/g, respectively. The potential mechanisms of adsorption were ligand exchange, chemical complexation, surface precipitation and electron coordination.