An Improved CH4 Profile Retrieving Method for Ground-Based Differential Absorption Lidar

Abstract

Range-resolved CH4 concentration measurement is important prior data for atmospheric physical and chemical models. Ground-based differential absorption lidar (DIAL) can measure the vertical distribution of CH4 concentration in the atmosphere. The traditional method uses lidar observational data and the lidar equation to calculate profiles, but the inversion accuracy is greatly affected by noise. Although some denoising methods can improve accuracy at low altitudes, the low signal-to-noise ratio caused by the effect of aerosol Mie scattering and lower aerosol concentrations at high altitudes cannot be solved. Here, an improved cubic smoothing spline fitting CH4 concentration profile inversion method is proposed to address this challenge. By adding a penalty term of the second derivative of the conventional cubic spline function to the objective function, this penalty term acts to smooth the fitting, allowing the fitting function to avoid necessarily passing through those noisy sampling points. This avoids the large fluctuations caused by noisy sampling points, effectively suppresses noise, captures signals with lower noise levels, and thereby enhances the inversion accuracy of the profiles. Simulations and case studies demonstrated the superiority of the proposed method. Compared with the traditional method, cubic smoothing spline fitting can reduce the mean error of the whole CH4 profile by 85.54%. The standard deviation of CH4 concentration retrieved is 3.59 ppb–90.29 ppb and 0.01 ppb–6.75 ppb smaller than the traditional method and Chebyshev fitting, respectively. Three real cases also indicate that the CH4 concentration retrieved by cubic smoothing spline fitting is more consistent with in-situ measurements. In addition, long-term DIAL observations have also revealed notable diurnal and seasonal trends in CH4 concentration at observation sites.