Author:
Deng Lipeng,Li Shuhan,Ke Liming,Liu Jinhe,Kang Jidong
Abstract
Keyhole at the end of a conventional friction stir welded (FSW) joint is one of the major concerns in certain applications. To address this issue, a novel keyhole refilling technique was developed for conventional friction stir spot welding (FSSW) using resistance spot welding (RSW). A three-phase secondary rectifier resistance welder was adapted for the refill of the keyhole in the 1.5 mm + 1.5 mm friction stir spot welded 2024-T4 aluminum alloy joint. The microstructure and tensile shear fracture behavior were compared for both the unfilled and refilled specimens. The results show that the plug and keyhole are dominated by solid state welding with some localized zones by fusion welding. The refill process significantly improved the maximum load capacity in tensile shear testing as the corona ring is enlarged leading to a larger bonding area. Moreover, the tensile shear fracture occurs in the refilled FSSW specimens at the corona bonding zone, while the fracture occurs at the hook zone in the unfilled keyhole.
Funder
National Natural Science Foundation of China
Jiangxi Education Department Natural Science of Foundation of China
Subject
General Materials Science,Metals and Alloys
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献