A Comparative Review of Binder-Containing Extrusion and Alternative Shaping Techniques for Structuring of Zeolites into Different Geometrical Bodies

Abstract

Zeolites are crystalline metallosilicates displaying unique physicochemical properties with widespread applications in catalysis, adsorption, and separation. They are generally obtained by a multi-step process that starts with primary mixture aging, followed by hydrothermal crystallization, washing, drying, and, finally, a calcination step. However, the zeolites obtained are in the powder form and because of generating a pressure drop in industrial fixed bed reactors, not applicable for industrial purposes. To overcome such drawbacks, zeolites are shaped into appropriate geometries and desired size (a few centimeters) using extrusion, where zeolite powders are mixed with binders (e.g., mineral clays or inorganic oxides). The presence of binders provides good mechanical strength against crushing in shaped zeolites, but binders may have adverse impacts on zeolite catalytic and sorption properties, such as active site dilution and pore blockage. The latter is more pronounced when the binder has a smaller particle size, which makes the zeolite internal active sites mainly inaccessible. In addition to the shaping requirements, a hierarchical structure with different levels of porosity (micro-, meso-, and macropores) and an interconnected network are essential to decrease the diffusion limitation inside the zeolite micropores as well as to increase the mass transfer because of the presence of larger auxiliary pores. Thus, the generation of hierarchical structure and its preservation during the shaping step is of great importance. The aim of this review is to provide a comprehensive survey and detailed overview on the binder-containing extrusion technique compared to alternative shaping technologies with improved mass transfer properties. An emphasis is allocated to those techniques that have been less discussed in detail in the literature.