Affiliation:
1. Institute for Applied Materials, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen, Germany
2. Department of Microsystems Engineering, University Freiburg, Georges-Koehler-Allee 102, D-79110 Freiburg, Germany
Abstract
The rapid tooling of mold inserts for injection molding allows for very fast product development, as well as a highly customized design. For this, a combination of rapid prototyping methods with suitable polymer materials, like the high-performance thermoplastic polymer polyetheretherketone (PEEK), should be applied. As a drawback, a huge processing temperature beyond 400 °C is necessary for material extrusion (MEX)-based 3D printing; here, Fused Filament Fabrication (FFF) requires a more sophisticated printing parameter investigation. In this work, suitable MEX printing strategies, covering printing parameters like printing temperature and speed, for the realization of two different mold insert surface geometries were evaluated, and the resulting print quality was inspected. As a proof of concept, ceramic injection molding was used for replication. Under consideration of the two different test structures, the ceramic feedstock could be replicated successfully and to an acceptable quality without significant mold insert deterioration.
Reference43 articles.
1. Hull, C.W. (1986). Apparatus for Production of Three-Dimensional Objects by Stereolithography. (4575330), U.S. Patent.
2. Intelligent additive manufacturing and design: State of the art and future perspectives;Xiong;Addit. Manuf.,2022
3. (2011). Additive Manufacturing—General Principles—Fundamentals and Vocabulary (Standard No. DIN EN ISO/ASTM 52900:2021).
4. A critical review on Classification of materials used in 3D printing process;Ranjan;Mater. Today Proc.,2022
5. (2024, July 01). Lithoz Company. Available online: https://lithoz.com/en.