Exploration of the Compressive Strength and Microscopic Properties of Portland Cement Taking Attapulgite and Montmorillonite Clay as an Additive

Abstract

The effects of attapulgite and montmorillonite calcinated at 750 °C for 2 h as supplementary cementing materials (SCMs) on the working properties, mechanical strength, phase composition, morphology, hydration and heat release of ordinary Portland cement (OPC) were studied. The results show that pozzolanic activity increased with time after calcination, and with the increase in content of calcined attapulgite and calcined montmorillonite, the fluidity of cement paste exhibited a downward trend. Meanwhile, the calcined attapulgite had a greater effect on the decrease in the fluidity of cement paste than calcined montmorillonite, and the maximum reduction was 63.3%. Within 28 days, the compressive strength of cement paste with calcined attapulgite and montmorillonite was higher than that of the blank group in the later stage, and the optimum dosages of calcined attapulgite and montmorillonite were 6% and 8%, respectively. In addition, the compressive strength of these samples reached 85 MPa 28 days later. The introduction of calcined attapulgite and montmorillonite increased the polymerization degree of silico-oxygen tetrahedra in C-S-H gels during cement hydration, thereby contributing to accelerating the early hydration process. In addition, the hydration peak of the samples mixed with calcined attapulgite and montmorillonite was advanced, and the peak value was lower than that of the control group.