Process Map Definition for Laser Metal Deposition of VDM Alloy 780 on the 316L Substrate

Abstract

VDM Alloy 780 is a novel Ni-based superalloy that allows for approximately 50 °C higher operating temperatures, compared to Inconel 718, without a significant decrease in mechanical properties. The age hardenable NiCoCr Alloy combines increased temperature strength with oxidation resistance, as well as improved microstructural stability due to γ′-precipitation. These advantages make it suitable for wear- and corrosion-resistant coatings that can be used in high temperature applications. However, VDM Alloy 780 has not yet been sufficiently investigated for laser metal deposition applications. A design of experiments with single tracks on 316L specimens was carried out to evaluate the influence of the process parameters on clad quality. Subsequently, the quality of the clads was evaluated by means of destructive and non-destructive testing methods, in order to verify the suitability of VDM Alloy 780 for laser metal deposition applications. The single-track experiments provide a basis for coating or additive manufacturing applications. For conveying the results, scatter plots with regression lines are presented, which illustrate the influence of specific energy density on the resulting porosity, dilution, powder efficiency, aspect ratio, width and height. Finally, the clad quality, in terms of porosity, is visualized by two process maps with different mass per unit lengths.