A Water-Soluble Thermoplastic Polyamide Acid Sizing Agents for Enhancing Interfacial Properties of Carbon Fibre Reinforced Polyimide Composites

Abstract

Carbon-fiber-reinforced polyimide (PI) resin composites have gained significant attention in the field of continuous-fiber-reinforced polymers, in which the interfacial bonding between carbon fiber and matrix resin has been an important research direction. This study designed and prepared a water-soluble thermoplastic polyamide acid sizing agent to improve the wettability of carbon fiber, enhance the van der Waals forces between carbon fiber and resin and strengthen the chemical bonding between the sizing agent and the alkyne-capped polyimide resin by introducing alkyne-containing functional groups into the sizing agent. This study found that the addition of a sizing layer effectively bridged the large modulus difference between the fiber and resin regions, resulting in the formation of an interfacial layer approximately 85 nm thick. This layer facilitated the transfer of stress from the matrix to the reinforced carbon fiber, leading to a significant improvement in the interfacial properties of the composites. Adjusting the concentration of the sizing agent showed that composites treated with 3% had the best interfacial properties. The interfacial shear strength increased from 82.08 MPa to 108.62 MPa (32.33%) compared to unsized carbon fiber. This research is significant for developing sizing agents suitable for carbon-fiber-reinforced polyimide composites.