A Macroscopic Interpretation of the Correlation between Electrical Percolation and Mechanical Properties of Poly-(Ethylene Vinyl Acetate)/Zn Composites

Abstract

Elastic composites were prepared using a procedure involving hot plates and zinc powder that was directly dispersed into an EVA matrix. The correlation between the zinc content and the conductive properties of the material was studied via impedance spectroscopy, the thermal properties of the material were studied via differential calorimetry and the mechanical properties of the composites were studied via tensile strength curves, representing an important advancement in the characterization of this type of composite material. The composites’ tensile strength and elongation at break decrease with the addition of filler since zinc particles act as stress-concentrating centres, while the composites’ hardness and Young’s modulus increase because of an increase in the stiffness of the material. The AC perturbation across the EVA/Zn composites was characterized using an RC parallel equivalent circuit that allowed us to easily measure their resistivity (ρp) and permittivity (εp). The dependence of these electrical magnitudes on the zinc content is correlated with their mechanical properties across the characteristic time constant τp =  ρp·εp of this equivalent circuit. The dependence of the mechanical and electrical magnitudes on the zinc content is consistent with the formation of percolation clusters. The addition of graphite particles increases their potential performance. Three possible mechanisms for the electrical transport of the ac-perturbation across the EVA/Zn composites have been identified. Chemical corrosion in acid media causes the loss of zinc surface particles, but their bulk physical properties practically remain constant.