Affiliation:
1. Institute of Concrete Science and Technology (ICITECH), Universitat Politècnica de València, 46022 València, Spain
Abstract
The use of geopolymers has revolutionized research in the field of construction. Although their carbon footprint is often lower than that of traditional mortars with Portland cement, activators such as sodium silicate have a high environmental impact in the manufacturing of materials. Employing alternative alkali sources to produce geopolymers is necessary to obtain materials with a lower carbon footprint. The present research explores the use of rice husk ash (RHA) as an alternative source of silica to produce alkaline activators by four methods: reflux; high pressure and temperature reaction; thermal bath at 65 °C; and shaking at room temperature. To evaluate the efficiency of these methods, two types of experiments were performed: (a) analysing silica dissolved by the filtering/gravimetric method; and (b) manufacturing mortars to compare the effectiveness of the treatment in mechanical strength terms. The percentages of dissolved silica measured by the gravimetric method gave silica dissolution values of 70–80%. The mortars with the best mechanical strength results were the mixtures prepared with the thermal bath treatment at 65 °C. Mortar cured for 1 day (at 65 °C), prepared with this activator, yielded 45 MPa versus the mortar with commercial reagents (40.1 MPa). It was generally concluded that utilising original or milled RHA in preparing activators has minimal influence on either the percentage of dissolved silica or the mechanical strength development of the mortars with this alternative activator.
Funder
European Union—Next Generation
Subject
General Materials Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献