Optimization of Controlled Mechanical Ventilation Systems for Indoor Acoustic Comfort

Abstract

The indoor air quality inside living spaces is a fundamental factor in providing adequate comfort. In order to do this, a minimum air exchange must be ensured. This can be obtained by means of natural or mechanical ventilation or using the Controlled Mechanical Ventilation system (CMV). CMV ensures better energy performance, as in the winter period, the warm air that comes out of the building preheats the cold air that enters, and the opposite occurs in the summer period. A possible problem with CMV is the noise of the fans due to the movement of air and to the electric motor rotation. This work presents the results of acoustic measurements performed on an apartment equipped with CMV, operating in a single and simultaneous mode. Acoustic simulations are also presented using raytracing software on three typical apartments. The acoustic simulation carried out using an adequately calibrated 3D model has proved to be a valid support for the study of noise in rooms connected by doors and corridors. By differentiating the fan speed of the CMV, a considerable acoustic comfort improvement was obtained in the bedrooms and in the living room/kitchen. Class I for living rooms and class I or II for bedrooms according to the EN 16798-1 standard were achieved through speed optimization.