A Flexible Baseline Measuring System Based on Optics for Airborne DPOS

Abstract

Three-dimensional imaging for multi-node interferometric synthetic aperture radar (InSAR) or multi-task imaging sensors has become the prevailing trend in the field of aerial remote sensing, which requires multi-node motion information to carry out the motion compensation. A distributed position and orientation system (DPOS) can provide multi-node motion information for InSAR by transfer alignment technology. However, due to wing deformation, the relative spatial relationship between the nodes will change, which will lead to lower accuracy of the transfer alignment. As a result, the flexible baseline between the nodes affects the interferometric phase error compensation and further deteriorates the imaging quality. This paper proposes a flexible baseline measuring system based on optics, which achieves non-connect measurement and overcomes the problem that it is difficult to build an accurate wing deformation model. An accuracy test was conducted in the laboratory, and results showed that the measurement accuracy of the baseline under static and dynamic conditions was less than 0.3 mm and 0.67 mm, respectively.